Oct. 19, 2017 / Updated by Bessie Shaw to Windows 10
Nobody enjoys a computer stuck on the Windows 10 100% disk usage after the Windows 10 Fall Creators Update/Creators Update, but this high disk usage problem stops many Windows users from the continuity of their office work on desktops or laptops. Though the Creators Update (v1703) comes with amazing features, the new update also causes some big headaches, like no WiFi available, black screen, endless reboot loop, etc. In this case, during the using of the laptop or desktop, you may receive a notification asking you to close programs because of the low on memory or the 100% disk usage.
Then you find in Task Manager there is a red 100% marking on the Disk or the Memory, but in fact, you just open a PDF or browse a website your computer.
Are there any solutions for this problem? Don’t worry. This post will talk about how to fix the 100% disk usage after the Windows 10 Fall Creators Update/Creators Update.
Here we’ve had top 3 solutions to fix this high disk usage problem on your Windows 10 Fall Creators Update/Creators Update computer. Go on the reading and try the methods.
You can disable the Windows services Superfetch, HomeGroup Listener and HomeGroup Provider, Windows Search in Services and solve the Windows 10 100% disk usage issue. The Superfetch helps to pre-load the programs you often use into the memory. But if you don't use some of the programs after turning on the PC, it will still take up a high percentage of the disk. Also, the HomeGroup services can result in the high workload of the disk and the CPU and slow down the system running. If you seldom use such Windows services, it is better to disable them and fix the 100% disk usage.
1. Use Windows shortcut keys Win + R to launch Run.
2. Type services.msc and press the Enter.
3. Locate to the Superfetch.
4. Double click the Superfetch service for Properties.
5. Select Automatic (Delay Start) from the drop-down menu of Startup type.
6. Double click the HomeGroup Listener, the HomeGroup Provider and the Windows Search.
5. Select Disable from the drop-down menu of Startup type.
Message Signaled Interrupt (MSI) is an alternative to line-based interrupts. The Windows 10 100% disk usage problem occurs when MSI mode is enabled because if the Advanced Host Controller Interface PCI-Express (AHCI PCIe) models run with the inbox storahci.sys driver, the disk drive may try device resets after the unresponsive or lag input/output. It’s no need to learn about details of such complex PC knowledge when coming with the problem, but you can still solve the high disk size problem via disabling the mode:
1. Go to the Device Manager and make sure there's the inbox AHCI driver, storahci.sys, in Driver Details of the Standard SATA AHCI Controller Properties.
2. Go to the Details tab and select Device Instance Path from the drop-down menu of the Property.
3. Check the value and copy it with the right-click. For example, we have the value: PCI\VEN_8086&DEV_1E03&SUBSYS_08061025&REV_04\3&11583659&0&FA.
4. Use Windows shortcut keys Win + R to launch the Run.
5. Type regedit and press the Enter.
6. In the Registry Editor, follow the path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\Value\Device Parameters\Interrupt Management\MessageSignaledInterruptProperties
(Note: Value refers to the Device Instance Path you copied in step 3.)
7. Double click the MSISupported on the right side.
8. Change the Value data to 0.
9. Click OK.
10. Restart the computer to make the change take effect.
After that, the Windows 10 100% disk usage or the high memory/CPU usage problem will never get on your nerves anymore.
Note: To avoid some serious system issues, don’t forget to backup the Registry before the modification.
Outdated or missing Advanced Host Controller Interface (AHCI) driver can result in 100% disk usage after the Windows 10 Fall Creators Update/Creators Update. So you need to update the AHCI driver with professional driver troubleshooters, like Driver Talent. Click the button to get it directly.
It is a one-click driver updater that helps find faulty AHCI driver and download the official and the best-match one to solve the issue. Here’s how:
1. Click the Scan to detect outdated AHCI drivers on the computer.
2. Click Update to download and install proper AHCI driver.
3. Reboot to make the driver changes take effect.
Note: It is better to use Driver Talent to backup drivers before any system changes in case other problems occur.
All of the above are the possible best workarounds for solving the 100% disk usage problem after the Windows 10 Fall Creators Update/Creators Update. Hope this post is helpful. Also, you can share your methods via the comment section below, the LEFT MENU on this page or our forum if you have more solutions to fix the Windows 10 100% disk usage on Creators Update or the high disk usage problem. Any other Windows 10 Fall Creators Update/Creators Update/Anniversary Update issues please see Windows 10 section on this site.
|Download, Update & Fix Your Windows Drivers||Intuitive iOS File Manager for iPhone, iPad, iPod Touch|
|Free Download||Free Download|