Top 4 Ways to Fix Headphone Not Working after Windows 10 Update

Jun. 24, 2022 / Updated by Bessie Shaw to Windows 10

The headphone not working after Windows 10 update issue is very annoying when you want to watch a film or listen to your favorite music quietly and don't want to disturb others. Here are 4 troubleshooting methods that help your fix no sound from headphones in Windows 10, also applied to Windows 10 Creators Update, Fall Creators Update and Spring Creators Update.

Method 1. Disable Front Panel Jack Detection to Fix Headphone Not Working after Windows 10 Update

If you've installed the Realtek software, a simple solution to fix the headphones not working issue after Windows 10 update is disabling the headphone jack detection. Just do the following steps.

Step 1. Press Windows + R altogether to open the Run window.

Step 2. Type "Control Panel" and hit Enter toopen Control Panel.

Step 3. Click Hardware and Sound.

Step 4. Locate Realtek HD Audio Manager and click on it.

fix_headphone_not_working_windows_10_update.png

Step 5. Under the Connector settings, click the "Disable front panel jack detection" check box.

Method 2. Update Sound Driver to Fix No Sound from Headphone in Windows 10

In most cases, headphone not working in Windows 10 occurs due to incompatible sound driver. Therefore, you need to update your outdated driver. If you prefer a one-stop driver update solution, it's recommended to use a dedicated and reputable driver download and update utility tool, such as Driver Talent, which could scan out your faulty sound driver in seconds and then automatically download and install the best-matched version in no time.

Click the button below to grab Driver Talent directly.

Download Now

Take the 3-step guide to use Driver Talent to update your sound driver to fix headphones not working after Windows 10 update.

Step 1. Scan Your Computer

Start Driver Talent. Click "Scan" to perform a full scan of your computer. Driver Talent will reveal the numbers of all your outdated, corrupted, broken or missing drivers within a few seconds, your problematic sound driver included.

Scan Button.png

Step 2. Update Your Sound Driver to Fix Headphone Not Working in Windows 10

Click "Repair" to fix your detected sound driver issue. Driver Talent will automatically download and install the best-matched sound driver behind the scene. You also have the freedom to update all your drivers to the latest version with a single click. But don't update what ain't broken for stable performance.

Drivers .png

Step 3. Reboot Your Computer

Reboot your computer to make the sound driver update take effect.

Note: Bear in mind that back up you drivers with Driver Talent before installing any new driver update in case driver crashes take place.

Read Also: Free Download, Update Sound Card Drivers for Windows Laptop/Desktop

Apart from being a driver download and update program, Driver Talent comes with other premium features, such as drivers restore, drivers uninstall, drivers pre-download for another PC, PC Repair (no sound, no video, no Wi-Fi etc.), hardware detection, VR support check and PC speed up, etc..

Method 3. Set Headphone as Default Playback Device

Sometimes, if the headphone is not set as the default playback device, the headphone not working in Windows 10 problem will happen. Here's how to set headphone as the default device.

Step 1. Right-click on the Start button and click Control Panel.

Step 2. Click Hardware and Sound and then select Sound.

Step 3. Under the Playback tab, right-click in the window and select Show Disabled devices.

Step 4. You’ll see headphones are listed, right click on your headphone device, and then select Enable.

Step 5. Click Set as Default and then click Apply.

Method 4. Change Default Sound Format to Fix Headphone Not Working in Windows 10

If your default sound format is not correct, you'll also come across the headphone not working after Windows 10 update issue. Here's how to change your default sound format.

Step 1. Right-click on the Start button and click Control Panel.

Step 2. Click Hardware and Sound and then select Sound.

Step 3. In the Playback tab, double-click on your default playback device (with a green thick mark next to it).

Step 4. Switch to the Advanced tab, and now you could change the default sound format from the drop-down menu.

You may also like to check out:

If you have any questions or suggestions about how to fix headphones not working after Windows 10 update issue, please make comments in the comments section below.

Company

Driver Talent is a professional Windows driver download and update utility from drivethelife.com, a professional team of OSToto Co., Ltd. Since the establishment in 2009, the team has been working hard to develop computer and Internet software so as to improve the work and lives of people. Our products are well received by people from all over the word.

Our Spirit

“User-centric Design, Technology Fundamental, Principles Open”

Our Products

Driver Talent, Driver Talent for Network Card, ExplorerMax


Driver-Talent ExplorerMax DownLoad_DT_Net Driver Talent for Network Card
Smart and advanced file explorer tool for Windows platforms Download & Install Network Drivers without Internet Connection
30-day Free Trial Free Download

We Are Trusted By