Sep. 25, 2018 / Updated by Bessie Shaw to Windows Driver Solutions
When VR games lovers experiment with HTC Vive, the best Virtual Reality headset, they’ve found a lot to appreciate as well as a lot of unexpected issues, such as driver not calibrated (error code 206) and driver calibration valid (error code 207).
Besides, problems stemming from the headset or the PC, like headset not found (108), driver failed (200), HMD display not found (208), connect failed (301), etc. also occur during the device setup or connection.
This article will introduce to you 3 solutions to fix HTC Vive driver calibration error, or so called error 206 or error 207.
Vive driver not calibrated error, or driver calibration valid error, is caused by a failure of the headset calibration to be loaded by SteamVR, which often shows error code 206 or 207 on the screen.
To solve Vive error 206 or 207, you could choose one of the methods below:
You need proper USB drivers to make all the SteamVR USB devices performance on the PC. Run Driver Talent on the computer and follow the steps below to uninstall and reinstall the drivers.
Note: Driver Talent is a professional driver troubleshooter. If it is not installed on your PC, you could click the button below to download it directly.
Step 1: Uninstall the USB Drivers
Scan your PC to check if there are problematic drivers, and then click Uninstall menu to uninstall the USB drivers.
Step 2: Reinstall the Drivers
Plug your HTC Vive headset to the PC and click the Peripheral Drivers menu to add the USB devices. Driver Talent will download and install the best-matched SteamVR USB drivers for the PC.
Step 3: Restart the PC
Restart the computer to make all the newly installed drivers take effect.
Note: Driver Talent provides the VR Support Check function to find out whether your computer is compatible with HTC Vive VR device. Click Hardware Detection in the Toolbox menu to do a scan.
Now set up your headset to see if the HTC Vive driver calibration error has been solved. Hope you could enjoy the VR games.
Removing USB Device from Device Manager does help to fix error 206 or 207.
1. Open the Device Manager and find the USB device on the list.
2. Right click the device and select Uninstall.
3. Connect the HTC Vive headset to the PC, and Windows will detect it and reinstall the SteamVR USB driver. (Note: Make sure your PC is connected to the Internet.)
You could reset your headset to force the drivers to reinstall and here are the steps:
1. Unplug the HTC Vive headset from the computer. Run SteamVR. Click the menu and select Settings.
2. Choose Developer from the left column. Scroll down to the Reset section and click the button Remove all SteamVR USB Devices.
3. Plug the headset to your PC. Make sure the PC is connected to the Internet and wait for the drivers to be installed.
Repeat the steps if the error 206 or 207 continues to persist. If all the methods above do not work, it is recommended to refer to HTC Vive support website.
Any knowledge of fixing HTC Vive driver calibration error is welcome. Please comment in the section below or click the LEFT MENU for more help. Any other driver-related issues, see Resource Center section.
|ExplorerMax||Driver Talent for Network Card|
|Smart and advanced file explorer tool for Windows platforms||Download & Install Network Drivers without Internet Connection|
|30-day Free Trial||Free Download|